Quick Click Dust Collection Separator Cyclone Interceptor with 2.5m Vacuum Connector Hose

£79.95 (£66.63 excluding VAT)

  • Designed to efficiently separate dust, debris, and liquids from an airstream and collect the material in a general purpose recovery bin reducing the materials which reach the vacuum
  • 20cm (8inch) upper housing with curved surfaces insures the debris entering the separator travels freely past the centre baffle and smooths the airstream path which minimises its impact on the performance of the vacuum and raises efficiency
  • Designed around industry standard vacuums and hoses to make connecting the separator easy and efficient with minimal need for adaptors or duct tape. Both the intake and outlet to the vacuum are designed to be compatible with industry standard wet-dry domestic vacuums like Bosch, Festool, Makita, Shop-Vac, Vacmaster, Titan, DeWalt, and many other brands. The hoses will fit male into the 58mm inlet. The outside of the inlet and exit to the vacuum are designed to accept popular 63mm dust collection wire support hoses commonly used in home and commercial workshops
  • Commercial grade rubber mounting gasket insures against air leaks that can rob performance
  • Ideal for use in a broad range of applications including woodworking, auto body detail shops, commercial painters, sheet rock installation and repair, remodelers, construction clean-up contractors, stone counter top production shops, hard wood floor refinishers, liquid capture, gardening, and slurry collection

Out of stock

  • Free shipping over £100
  • Order yours before 12.00pm for same day despatch

Description

Designed to efficiently separate dust, debris, and liquids from an airstream and collect the material in a general purpose recovery bin reducing the materials which reach the vacuum. Capturing both bulky and very fine dust the 95798 separator dramatically reduces the need to replace filters, filter bags and extends the vacuums useful life. The Quick Click separator combines cyclonic action with a unique concave baffle design that results in highly efficient separation of both large and very fine particulates. The result is a clean air stream reaching the vacuum which insures the vacuums performance is not compromised by dirty filters that reduce airflow and sealed suction. The 95798 separator was designed around industry standard vacuums and hoses to make connecting the separator easy and efficient with minimal need for adaptors or duct tape. Both the intake and outlet to the vacuum are designed to be compatible with industry standard wet-dry domestic vacuums like Bosch, Festool, Makita, Shop-Vac, Vacmaster, Titan, DeWalt, and many other brands. The hoses will fit male into the 58mm inlet. The outside of the inlet and exit to the vacuum are designed to accept popular 63mm dust collection wire support hoses commonly used in home and commercial workshops. The 95798 has a 100mm (4inch) diameter discharge point to the debris recovery bin which helps keep the separator clear of performance robbing clogs. When mounted to the lid of the recovery bin you will notice there is a cylinder extending from the 165mm (6.5inch) wide mounting flange that presses through the recovery bin lid to keep the Quick Click separator. Combining the larger flange width along with the extended cylinder insures the Quick Click Separator remains stable during use and helps insure a sealed condition. 97514 package includes a 2.5m x 38mm vacuum connection hose to connect the separator to your vacuum. This hose includes 58 and 63mm push fit ends for the vacuum.

Additional information

Weight 3500 g
EAN

5060623303112

Reviews

There are no reviews yet.

Be the first to review “Quick Click Dust Collection Separator Cyclone Interceptor with 2.5m Vacuum Connector Hose”